2000-2015年三江平原主要作物需水量征及影响因素分析          下载免费PDF全文

任修琳  李宏亮  张玉虎  蒲晓  张立林 《干旱区地理》2019,42(4):854-866

全生育期内作物需水量的研究是农业水资源有效利用和进行合理灌溉的重要依据。基于三江平原22个气象站点2000—2015年逐日气象观测资料及中国区域地面气象要素数据集，利用国际粮农组织 （FAO）Penman-Monteith模型和分段单值平均作物系数法，分别对三江平原水稻、玉米和大豆的作物需水量进行计算，分析作物需水量年际变化特征，采用通径分析法研究作物需水量的变化成因。结果表明：（1）三江平原16 a来年均参考作物蒸散量为537.4 mm，日均为 3.5 mm，呈波动减少趋势。（2）生长季内，水稻在分蘖期需水量最大，为177.1 mm，玉米在七叶期需水量最大，为99.7 mm，大豆在结荚期需水量最大，为96.1 mm；水稻、玉米和大豆的净灌溉需水量分别为195.4 mm、130.8 mm和72.2 mm，对灌溉的依赖程度水稻>玉米>大豆。（3）由通径分析结果可知，三江平原作物需水量的主要影响因素为净辐射、气温和日照时数。  相似文献   

Jason-2高度计电离层GIM误差分析及修正研究     

黄霞凤  苗洪利  苗翔鹰  薛文文 《海洋学报》2019,41(7):143-148

基于Jason-2高度计2015年地球物理数据集(GDR)38个周期太平洋海域的全球电离层图(GIM)电离层校正值和双频校正值的数据，分不同季度和不同纬度区域比较二者的差异，结果表明:GIM值与双频校正值之间存在明显的差异，GIM校正值普遍高于双频校正值，说明GIM高估了电离层路径延迟，GIM校正值与双频校正值的差异与季节和纬度区间有关。用梯度下降法得到GIM值的修正方程，将修正方程应用于2016年Jason-2的全年数据，修正后的GIM值与双频校正值十分接近，在各年份中均具有良好的适用性。在单频高度计不能使用电离层双频校正算法的情况下，可以利用不同季度和不同纬度区域的修正方程对同等高度的高度计GIM值进行修正以达到双频校正值的精度水平。  相似文献   

改进A?的高层建筑逃生路径规划算法研究   总被引：1，自引：0，他引：1  

靳海亮  王赢乐  袁鸣  陈梦龙 《测绘通报》2019,(11):17-21,25

针对高层建筑内部结构复杂，发生火灾时没有疏散引导情况，逃生通道极易发生拥堵导致疏散效率降低的问题，本文基于对A*算法的改进，提出了高层建筑逃生路径规划算法。该算法以高层建筑内部路网节点为关键要素，综合火灾发生位置、人员密度、人员数量等因素，从逃生终点优化分配、节点扩展优化、权值优化3个方面进行改进，实现了火灾发生时高层建筑内部的逃生路径规划，并以某高层建筑为例，验证了本文算法的可行性。  相似文献   

南阿尔金巴什瓦克基性麻粒岩的变质演化 P- T- t 轨迹     

郭晶  李云帅  张建新 《地质学报》2020,94(9):2698-2711

大陆碰撞造山带中高压麻粒岩的 P- T- t 轨迹研究对于理解造山带的热演化历史及大陆地壳的形成与演化具有重要的意义，然而，如何连接同位素年龄与变质演化过程是恢复和建立 P- T- t 轨迹的重点和难点。本文通过对南阿尔金巴什瓦克地区基性麻粒岩的详细岩相学研究，认为该基性麻粒岩经历了原岩阶段（M1）、峰期变质阶段（M2）、峰后退变质阶段（M3）以及晚期角闪岩相- 绿片岩相退变质阶段（M4）。其中，传统矿物温压计和矿物微量元素温压计获得该基性麻粒岩所记录的峰期变质条件分别为17. 5~22. 6 kbar，901~985℃ 和17~28 kbar，1012~1049℃，退变质阶段的温压条件为7. 6~10. 7 kbar，750~810℃。此外，锆石U- Pb 年代学结果表明基性麻粒岩的变质时代为491±3. 5 Ma (MSWD=0. 62)，结合锆石和石榴子石的微量元素分配系数以及前人的实验岩石学数据，认为该变质时代记录了早古生代高压- 超高温的变质事件，进而恢复了南阿尔金基性麻粒岩所记录的顺时针 P- T- t 轨迹。  相似文献   

隐伏正断层错动致地表破裂变形特征的研究     

齐剑峰  郝文拯  王晓明  张江伟 《震灾防御技术》2019,14(3):628-639

通过建立三维计算模型，对隐伏正断层在均匀错动、倾斜错动和翘倾错动方式下地表土体的应力路径、破裂和变形特征进行了研究。根据地表破裂临界值，分析了工程建设“避让带”的宽度和起始位置的变化特征。根据行业规范，提出工程建设“关注带”的确定方法，分析了“关注带”的宽度和起始位置的变化特征，得到以下主要结论:①在断层错动过程中，位于两侧的地表土体应力路径变化明显不同，下盘一侧和上盘一侧分别以三轴拉伸和三轴压缩为主；②地表强变形带与地表破裂带的分布并不一致，需要综合考虑等效塑性应变和总位移比2个指标来评价同震地表错动对建筑物的影响；③当隐伏断层错动的垂直位移达到3m时，工程建设“避让带”的宽度在10—90m范围内变化，受上覆土体厚度和断层倾角的影响最大，而工程建设“关注带”的宽度在150—400m范围内变化，受上覆土体的性质影响最大。  相似文献   

P–T evolution of Precambrian eclogite in the Sveconorwegian orogen,SW Sweden          下载免费PDF全文

L. Tual  P. Pitra  C. Möller 《Journal of Metamorphic Geology》2017,35(5):493-515

Conditions of the prograde, peak‐pressure and part of the decompressional P–T path of two Precambrian eclogites in the eastern Sveconorwegian orogen have been determined using the pseudosection approach. Cores of garnet from a Fe–Ti‐rich eclogite record a first prograde and syn‐deformational stage along a Barrovian gradient from ~670 °C and 7 kbar to 710 °C and 8.5 kbar. Garnet rims grew during further burial to 16.5–19 kbar at ~850–900 °C, along a steep dP/dT gradient. The pseudosection model of a kyanite‐bearing eclogite sample of more magnesian bulk composition confirms the peak conditions. Matrix reequilibration associated with subsequent near‐isothermal decompression and partial exhumation produced plagioclase‐bearing symplectites replacing kyanite and clinopyroxene at an estimated 850–870 °C and 10–11 kbar. The validity of the pseudosections is discussed in detail. It is shown that in pseudosection modelling the fractionation of FeO in accessory sulphides may cause a significant shift of field boundaries (here displaced by up to 1.5 kbar and 70 °C) and must not be neglected. Fast burial, exhumation and subsequent cooling are supported by the steepness of both the prograde and the decompressional P–T paths as well as the preservation of garnet growth zoning and the symplectitic reaction textures. These features are compatible with deep tectonic burial of the eclogite‐bearing continental crust as part of the underthrusting plate (Eastern Segment, continent Baltica) in a collisional setting that led to an effectively doubled crustal thickness and subsequent exhumation of the eclogites through tectonic extrusion. Our results are in accordance with regional structural and petrological relationships, which demonstrate foreland‐vergent partial exhumation of the eclogite‐bearing nappe along a basal thrust zone and support a major collisional stage at c. 1 Ga. We argue that the similarities between Sveconorwegian and Himalayan eclogite occurrences emphasize the modern style of Grenvillian‐aged tectonics.  相似文献   

Significance of post‐peak metamorphic reaction microstructures in the ultrahigh temperature Eastern Ghats Province,India          下载免费PDF全文

David E. Kelsey  Laura J. Morrissey  Martin Hand  Chris Clark  Renee Tamblyn  Adrian A. Gaehl  Sarah Marshall 《Journal of Metamorphic Geology》2017,35(9):1081-1109

Ultrahigh temperature (UHT) granulites in the Eastern Ghats Province (EGP) have a complex P–T–t history. We review the P–T histories of UHT metamorphism in the EGP and use that as a framework for investigating the P–T–t history of Mg–Al‐rich granulites from Anakapalle, with the express purpose of trying to reconcile the down‐pressure‐dominated P–T path with other UHT localities in the EGP. Mafic granulite that is host to Mg–Al‐rich metasedimentary granulites at Anakapalle has a protolith age of c. 1,580 Ma. Mg–Al‐rich metasedimentary granulites within the mafic granulite at Anakapalle were metamorphosed at UHT conditions during tectonism at 960–875 Ma, meaning that the UHT metamorphism was not the result of contact metamorphism from emplacement of the host mafic rock. Reworking occurred during the Pan‐African (c. 600–500 Ma) event, and is interpreted to have produced hydrous assemblages that overprint the post‐peak high‐T retrograde assemblages. In contrast to rocks elsewhere in the EGP that developed post‐peak cordierite, the metasedimentary granulites at Anakapalle developed post‐peak, generation ‘2’ reaction products that are cordierite‐absent and nominally anhydrous. Therefore, rocks at Anakapalle offer the unique opportunity to quantify the pressure drop that occurred during so‐called M2 that affected the EGP. We argue that M2 is either a continuation of M1 and that the overall P–T path shape is a complex counter‐clockwise loop, or that M1 is an up‐temperature counter‐clockwise deviation superimposed on the M2 path. Therefore, rather than the rocks at Anakapalle having a metamorphic history that is apparently anomalous from the rest of the EGP, we interpret that other previously studied localities in the EGP record a different part of the same P–T path history as Anakapalle, but do not preserve a significant record of pressure decrease. This is due either to the inability of refractory rocks to extensively react to produce a rich mineralogical record of pressure decrease, or because the earlier high‐P part of the rocks history was erased by the M1 loop. Irrespective of the specific scenario, models for the tectonic evolution of the EGP must take the substantial pressure decrease during M2 into account, as it is probable the P–T record at Anakapalle is a reflection of tectonics affecting the entire province.  相似文献   

Stress‐dependent hardening and failure surfaces of dry sand     

W. Ehlers  O. Avci 《国际地质力学数值与分析法杂志》2013,37(8):787-809

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Tectonic interpretation of metamorphic tectonites: integrating compositional mapping,microstructural analysis and in situ monazite dating     

M. L. WILLIAMS  M. J. JERCINOVIC 《Journal of Metamorphic Geology》2012,30(7):739-752

Interpreting tectonic histories from metamorphic tectonites requires an understanding of the linkages and feedbacks between deformation and metamorphism. Relationships between deformation and metamorphism can be divided into two broad groups: active and passive. Active relationships involve direct interactions whereby deformation directly influences metamorphic reactions or metamorphism directly affects the rate or style of deformation. One of the most important ‘active’ relationships is the role that deformation plays in helping to remove unstable reactant phases and to promote the growth of stable product phases. Passive relationships are correlations or linkages that allow the deformation history to be integrated with the metamorphic history. Compositional mapping of major and accessory phases and especially maps of larger thin section domains are particularly valuable for evaluating strain partitioning, scales of equilibrium, relationships between metamorphic textures and deformational fabrics, and in particular, for interpreting geochronological data. Petrological pseudosections are an increasingly utilized tool for interpreting microtextures and for linking deformation, metamorphism, and large‐scale tectonics. In situ geochronology and petrological analysis of chronometer phases (i.e. monazite, xenotime, titanite, allanite, etc.) are a critical part of tectonic analysis of metamorphic rocks. The electron microprobe plays an essential role in characterizing chronometer phases and placing them into the context of silicate fabrics and textures.  相似文献   

闸坡站风暴潮增水与热带气旋登陆点及路径的关系     

魏晓宇  刘雪峰 《台湾海峡》2010,29(1):122-127

将1992～2006年15a间影响和登陆闸坡站的热带气旋按照登陆点和移动路径进行分类．研究各类热带气旋在闸坡站引起的风暴潮增水峰值的出现时间与热带气旋登陆点及移动路径的关系，定性分析热带气旋风场结构对风暴潮增水的影响并经过2007年至今风暴潮增水预报过程中的实例检验．结果表明：闸坡站的增水类型与热带气旋的登陆地点和路径关系密切．在闸坡站登陆的东北行热带气旋引起的风暴潮增水多出现在登陆前，其他路径则出现在登陆时或登陆后；在闸坡以西登陆的热带气旋引起的风暴潮增水峰值一般发生在登陆时或登陆后1h以内；在闸坡站以东登陆的热带气旋引起的风暴潮增水峰值一般发生在登陆前10h以上；而其他类型的热带气旋引起的风暴潮增水由于个例较少规律尚不明显．  相似文献